Assembled Tunnel Kiln for Manufacturing Red Brick

Basic Info

Model NO.	LYKILN
The Center Line Diameter of Kiln Bottom	125
The Net Width of The Kiln Room(M)	12
Rail Gauge(M)	12.8
The Distance of Kiln Shed Column(M)	19
The Min. Outer Diameter of The Circular	154
The Center Line Length of Kiln Body(M)	150/168
Stacking Layers for Green Bricks / Heigh	12/1.5
10,000 PCS/Day (Standard Brick)	30-33
Transport Package	Brick Tunnel Kiln
Specification	YDY125/12
Trademark	LiYuan
Origin	China
Production Capacity	20PCS/Years

Product Description

The assembled tunnel kiln

The assembled tunnel kiln is the key thermal equipment for the sintered brick process system. The kiln body does not move, and the green bricks are placed on the kiln cart, which forms a drying and sintering working system with the kiln cart and operating equipment. It mainly consists of equipment foundation, kiln body, thermal system, moisture exhuast system, power supply and control system.Effect drawings for the assembled tunnel kiln

 

The characteristics of assembled tunnel kiln Products:Sintered common brick, Sintered perforated-brick, Sintered facing board, Sintered hollow brick and hollow block, Sintered pavement brick. Output :The optimized thermal performance design and stainless steel duct ventilation ensure higher heat engineering efficiency. Energy saving: Factory production, aluminum silicate fiber insulation, kiln insulation, pipeline insulation, low energy consumption (within 300kcal/kg). Life time: Reasonable structural design, high quality materials, long service life.Adaptability: There are a variety of mediation methods, which can adjust the fluctuation within a narrow range of drying temperature curve, water loss curve and firing curve cause by changes of raw materials, the climate, calorific value and moisture content within a certain range. Fuel: According to the customer's products principle to select different sintering processes, internal firing , external firing , internal and external compatible sintering. Environment protection: Use centralized moisture exhaust to access tail gas clean-up facilities.The parameter table of asssembled tunnel kiln

The parameter table of asssembled tunnel kiln
Customized design according to customer's raw materials, output and terrain, suitable for internal firing, external firing and internal and external combustion
The kiln section	3.6-3.8m	4.6-4.8m	5.3-5.6m	6.9-7.4m	9.1-9.3m
Structural form	Composite steel structure, stainless steel pipe and aluminum silicate fiber insulation cotton are adopted
Combusition form	Internal firing, external firing and internal and external combustion
Environmental protection desulfurization	Providing technical parameters, recommended use, matched by users' choice

Comparison of assembled tunnel kiln and traditional tunnel kiln 1. Working system: Due to the same process of sintered bricks, the two kinds of tunnel kilns have similar working systems.2. Kiln structure: Compared with the traditional tunnel kiln with field construction refractory brick, insulating brick, and load-bearing red brick structure, the assembled tunnel kiln with steel structure kiln body produced in factory and aluminum silicate fiber insulation cotton has better performance in heat preservation, air leakage, thermal shock resistance and other aspects, which is more beneficial to energy saving3. Kiln foundation: Compared with the traditional tunnel kiln foundation investment, the whole assembled tunnel kiln body is lighter, which could reduce the kiln foundation requirement and the basic investment cost.4. Heat engineering system: Compared with the traditional tunnel kiln with red brick masonry pipe, assembled tunnel kiln with stainless steel pipe (keep warm with insulation cotton), pipe wind resistance is smaller, insulation effect is better, which is more beneficial to energy saving. 5.Moisture exhaust:Compared with the traditional tunnel kiln of the moisture-removing mouth with red brick and cement board masonry, the assembled tunnel kiln with the corrosion-resistant glass-reinforced moisture exhaus system has a longer service life and will be easier maintenance. 6. Construction: The assembled tunnel kiln factory production and hoisting in site, after the completion of the design can be produced synchronously with the on-site equipment foundation construction The construction period is reduced significantly,which could be shorten the period of capital recovery